InnoCal provides quality calibration service for all styles of thermometers with
our accredited (ANSI/ISO/IEC 17025:2005) temperature calibrations.
Testing range from –197 to 1100°C (–323 to 2012°F) comparison;
electrical simulation –270 to 2316°C (–454 to 4200°F)
Direct-comparison measurements to uncertainties as low as ±0.03°C +
¼ of the instruments’ resolution at a 95% confidence level
Calibration reports include measured data, emergent stem corrections,
and ice point references as required to meet the most stringent quality
and scientific requirements
InnoCal is the authorized service center for ERTCO brand liquid-in-glass (LIG) thermometers. We calibrate any make and model of LIG thermomters.
All styles such as bare wire, sheathed, grounded, ungrounded, or exposed junction probes. Calibration
service for all common types including: J, K, T, and E. We also serve the less common types like R, S, N, B.
Contact us if you don't see you type listed. We can do it!
RTDs and Thermistors
Meters at uncertainties as low as (K=2) ±0.21°C + 0.0001/°C
Our direct comparison methods—utilizing precision SPRTs, baths,
chambers, or dry blocks—allow us to perform measurements from
–80 to 1000°C (-112 to 1832 °F) at uncertainties as low as (K=2) ±0.018°C
Testing range is –30 to 500°C (–22 to 932°F)
We perform NIST-traceable infrared calibrations using Fluke’s
IR calibrators correcting for changing emissivities